injection flow meaning in English
注入流
Examples
- After the automation system began to run in 10 , 2001 , the whole seawater injection flow can be supervised all the time , and the water quality has been improved to eligible degree . at the same time , the management is ameliorated greatly , and the cost is decreased
本系统2001年10月正式运行后，实现了注海水系统全流程自动化监控，技术指标均达到埕岛油田注水要求；悬浮固体含量5 . 0mg l ；溶解氧含量0 . 1mg l ，使水质得到了有效地控制。 - At the preliminary stage of burning the gas flows along the back surface of the submerged nozzle and no recirculation forms in the aft - end cavity . at the medium stage of burning a weak recirculation forms in the rear of aft - end cavity by the force of injection flow . at the end stage of burning the flow separates at the c ombustion channel and a strong vortex forms in the aft - end cavity
实验结果表明，在发动机工作过程中随着燃面的退移，燃烧室尾部的流动会发生很大变化，初始时刻背壁区加质流沿喷管背壁进入喷管，背壁区没有回流形成；中间时刻在加质流的驱动下背壁区后部形成较弱的回流；结束时刻气流在燃烧室壁面分离，背壁区形成强烈的回流。 - Under the influence of the submergence the turbulence intensity are quite high at the end stage of burning . however , the turbulence intensity decreases obviously at the medium stage and the preliminary stage of burning because the flow disturbance is eliminated by the mixture of injection flow and main flow
受喷管潜入的影响，结束时刻流场的湍流脉动非常强烈，而中间时刻和初始时刻，由于加质流与主流的强迫混合可以消除气流扰动向下游的传播和扩展，流场的湍流脉动明显减弱。 - Using commercial finite element software ansys , the numerical simulations of the forming processes of decorated rib and handle , which are key positions in the door outer are conducted and investigated the differences of vpf and tradition forming . by using numerical simulation that investigates the effects of viscous injection flow rate on plank ’ s vpf formability and based on those investigated four - aluminum alloy ’ s vpf . the die has been designed for the door outer ’ s viscous pressure forming
首先采用商用有限元分析软件ansys对车门成形中的关键部位装饰筋和把手的成形进行了数值模拟,对比分析了粘性介质压力成形与刚性模成形的特点;分析了粘性介质压力成形过程中,粘性介质的注入速率对成形试件壁厚分布的影响,在此基础上对四种常用的6000系列铝合金板材的粘性介质压力成形进行了有限元数值模拟。